LUMEN
  • pl
  • en
  • pl
  • en
  • THERMAL COMFORT

    Types of systems

    The following devices are responsible for heating, ventilation, and air conditioning in Lumen:

    Mechanical ventilation with air conditioning devices. The system provides air filtration, heating, cooling, and humidification as well as heat recovery.

    Ceiling appliances that provide heating and cooling.

    Radiators on the walls.

    Air conditioning in the building

    Depending on the furniture, you can adjust the air temperature to each room in your office. The air humidity is maintained by us and ranges from 40 to 60%.


    Pro tip

    During summer, the temperature in offices is adapted to the warmer outside temperatures and will never exceed 25°C. During winter, however, it never drops below 20°C.


    Temperature control panels in the offices

    The base temperature in the Lumen building is 21°C, and it can be regulated using three types of control panels found in the rooms.

    Panel 1

    It allows you to increase/decrease the temperature by a maximum of 2°C. If the base temperature in the office is 21°C, then with this panel you can increase it to 23°C or lower it to 19°C.

    Panel 2

    It allows you to increase/decrease the temperature by a maximum of 2°C. If the base temperature in the office is 21°C, then with this panel you can increase it to 23°C or lower it to 19°C.

    The air conditioning system has two operating modes:

    1) “Office hours” – the system reacts when the room temperature increases or drops from the base temperature by more than 0.3°C.

    2) “Non-office hours” – the system reacts when the room temperature increases or drops from the base temperature by more than 3°C.

    Panel 3

    Using this panel, you can increase/lower the temperature between 18-25°C. The single change range is 0.5°C.

    When the room temperature is higher than the one you have set, the system starts lowering it. The words “COOL” and “FAN” will appear on the display.

    When the room temperature is lower than the one you have set, the system starts increasing it. The words “HEAT” and “FAN” will appear on the display.

    If you click “display” to set a new temperature in the room, the display shows the word “SETPOINT.”


    Contact us

    Do you wish to know more, or maybe need some help? Our team is waiting for you! Below you will find contact information about matters relating to this section.

    Paweł
    Bartoszko

    Lumen Building Technical Service Manager
    Paweł Bartoszko
    +48 506 000 893

    Responsible for coordinating the repair of defects in the building, clarifies questions regarding technical issues in the premises of the rented premises, and issues approvals for technical changes introduced in the premises.
    Air conditioning
    Arrangement changes during the term of the lease
    Building access control
    COVID-19 notifications
    Faults
    Renovations
    Singu app access

    Mariusz
    Stefański

    Deputy Manager of Technical Service of the Lumen Building
    Mariusz Stefański
    +48 609 203 201

    Responsible for coordinating the repair of defects in the building, clarifies questions regarding technical issues in the premises of the rented premises, and issues approvals for technical changes introduced in the premises.

    Air conditioning
    Arrangement changes during the term of the lease
    Building access control
    COVID-19 notifications
    Faults
    Renovations
    Singu app access